|
How to Apply Mini Links System |
| No glue! An increasing number of extension professionals are selecting the Mini Links system for its convenience. Overall, this is the only technique (aside from weaving), in which glue or other chemicals are not required. |
| Step
1 |
Step
2 |
Step
3 |
 |
 |
 |
| Section client's hair |
Insert pulling needle through tube |
Grab a portion of client's hair with pulling needle |
| |
|
|
| Step 4 |
Step 5 |
Step 6 |
 |
 |
 |
| Slide the portion of hair
through tube |
Hold the tube .5 to 1 inch
from scalp |
Insert
Pre-tipped hair through the
tub |
| |
|
|
| Step 7 |
Step 8 |
|
 |
 |
|
| Flatten the tub |
Finished and repeat steps |
|
|
|
| Removal
Process |
| Step
1 |
Step
2 |
 |
 |
Position tube
in first groove of Tube
Opener and apply pressure
slowly. |
Slide out the
extension
hair after opening the tube |
|
Warning: This process
must be applied by licensed Beauticians
only and we strongly recommend practicing
on a mannequin head before proceeding.
We are not responsible for any results
from using our products. Anyone,
who uses this product, must do so
at their own risk. If you are not
a beautician, please find your local
hair extension professional.
|
|
|
HOW TO APPLY – Lasting several months
|
Purchase:
Hair, reattachment tape, adhesive and
liquid release
Shampoo hair with clarifying or normal/oily
shampoo. Do not use conditioner |
 |
 |
| Part
hair starting at the bottom of the
head. Leave enough hair down at
the nape and around the perimeter
to cover the hair extensions. |
Cut
2 even strips of seamless hair and
pull off the white liner from 1
strip. It is best to add hair in
smaller strips (Approx. 1 ½
- 3") for less tension on the
hair and to wear it up or back. |
| |
|
 |
 |
| Apply
seamless hair sticky side down at
the part line. Leave about 1/8"
away from the top of the hairline.
It should not be placed right on
the scalp as it needs to be flexible
when you move it up and down. Hair
can be attached using the brick
layer method. Press down firmly
on the strip. |
Using
a rattail comb up sweep the strip
and secure with a clip so you can
see the back side. Smooth down hair
on strip with the rattail comb and
remove any bulky hairs that are
not sticking on the strip. |
| |
|
 |
|
| Take
the second strip, remove the white
liner and add adhesive. Apply the
adhesive to the sticky side. Do
not get adhesive on the scalp. |
Take
the strip #2 with adhesive on it,
turn it upside down so it is going
in the same direction as strip #1
and place it directly and evenly
onto the sticky side of strip #1.
Sticky sides should be together
and hair flowing in the same direction.
Press strips firmly together. Drop
more hair down and repeat. Continue
throughout the entire head. Hair
can be added diagonally at the sides
if you choose. Press down on all
taped areas to help it stay in longer.
Cut and style.
|
|
| Reapply:
Clean off strip and remove old tape with
alcohol and add more new tape. |
Removal:
Use liquid release. Spray lightly onto
top and bottom of the seamless hair extension
tape area and they will begin to loosen.
You can also place a plastic cap over
the hair and sit under a dryer set on
warm for 5 minutes. This allows he remover
to soften.
Gently remove the strips, use additional
remover to dissolve any residue left behind.
Use clarifying shampoo and work into the
oily areas where the remover has been
used. Rinse and repeat. Make sure oily
residue has been removed from the hair.
Do not apply conditioner if client
is going to get another attachment.
|
|
HOW TO APPLY – Lasting several days
|
| Purchase:
Hair, Reattachment tape, and remove it
(not liquid release).
Shampoo hair with clarifying or normal/oily
shampoo. Do not use conditioner. We
recommend our hair care kit with balancing
shampoo |
|
|
Part
hair starting at the bottom of the
head. Leave enough hair down at
the nape and around the perimeter
to cover the hair extensions.
|
Cut
2 even strips of seamless hair and
pull off the white liner from 1
strip. It is best to add hair in
smaller strips (Approx. 1 ½
- 3") for less tension on the
hair and to wear it up or back.
Do not use adhesive.
|
|
|
| Apply
seamless hair sticky side down at
the part line. Leave about 1/8"
away from the top of the hairline.
It should not be placed right on
the scalp as it needs to be flexible
when you move it up and down. Hair
can be attached using the brick
layer method. Press down firmly
on the strip. |
|
|
Drop more hair down and repeat. Continue
throughout the entire head. Hair can be
added diagonally at the sides if you choose.
Press down on taped area to help it stay
down longer.
Reapply: Clean off
strip and remove old tape with alcohol
and add more new tape.
Removal: Spray Remove
it or use a cotton swab of rubbing alcohol.
Add to tape area, dab and rub gently
with fingers. Carefully hold hair at
the scalp and remove slowly. Use as
much remover as needed.
|
|
How to Apply Pre tipped Hair |
Pre-glued
hair extensions are easy to apply since
the glue is already in place. At the end
of the hair is a protein tip shaped like
a fingertip. You melt the glue with the
fusing tool. Save time by not having to
do any cutting or weft removing. Shedding
is almost eliminated. Glue section is
much smaller and lays flatter. Less glue
means less breakage and tension. Hair
can be reused by removing the pre tipped
piece with remover, cut off the glue tip
and use your glue gun with adhesive sticks
to reapply. Tools needed:
1.
Pre tipped human hair (Body wave or Silky
Straight)
2. One-Hole
Template
3. Hair
connector
4. Fingers
optional
5. Remover
6. Flat Pliers
7. Keratin Fusion Removing
Solution
The part of the hair you are adding extension
to needs to be free from oils or any slippery
coating. We strongly recommend washing
clients hair and not adding conditioner
before applying extensions. |
| Step
1 |
Step
2 |
Step
3 |
 |
 |
 |
| Start sectioning client's hair
from bottom to top |
Insert template to root to protect
scalp from heat |
Twist
strands to ease placing pre tipped
hair. |
| |
|
|
| Step 4 |
Step 5 |
Step
6 |
 |
 |
 |
| Place Pre tipped hair under client's
hair, holding with one hand |
Place hair connector Tool under
hair |
Pinch
smoothly for about 3 seconds to
melt and smear glue into every hair
stand. |
| |
|
|
| Step 7 |
Step 8 |
|
 |
 |
|
| Roll fused part with fingers and
try to close tightly |
Finished - Do not shampoo or condition
hair within 24 hours. |
|
|
|
| Removal
Process |
| Step
1 |
Step
2 |
 |
 |
Apply
3 - 4 drops of Remover
on glued part |
Using
Flat Pliers, pinch the
fused part 5 times to break glue.
|
| |
|
 |
 |
Separate
pre tipped hair
from client's hair. |
Use
comb or shampoo to
remove glue residue |
|
Warning: This process
must be applied by licensed Beauticians
only and we strongly recommend practicing
on a mannequin head before proceeding.
We are not responsible for any results
from using our products. Anyone, who uses
this product, must do so at their own
risk. If you are not a beautician, please
find your local hair extension professional.
|
|
Lace Wigs |
| You
have got yourself a great front lace wig
and you're just dying to try it on. The
only problem is you are not quite sure
how to go about it. Read on to find out.
The best thing about applying a front
lace wig is that you can do it yourself.
It is also quite easy once you understand
the technique and practice it a couple
of times.
One of the major issues that many people
face is that a front lace wig frays
at the forehead area. To avoid it here
are a few tips to follow when attaching
a front lace wig?
You can choose between two types of
attachments: double sided tapes and
liquid adhesives. This is attached to
your scalp or balding area. Ensure that
the product you use is of a high quality
and suitable for human use. There are
special attachments available in the
market specially designed for the purpose.
Using adhesive: The front lace is put
back at least to a width of one inch.
The adhesive is then applied which disappears
into the lace front. The wig is then
placed over this. The proper use of
this method creates an illusion of hair
growing out of the scalp.
Using Tape: Cut the tape into strips
of 3 inches in length and approximately
3.8 inches in width. Take one strip
and lay it on to the polyurethane tape
patch area where the lace front connects
to it. Now you can lay the strip on
the front hairline to the edge of the
lace. Press and hold it down. Proceed
with laying the strips until you have
taped the entire front from edge to
edge. Remember to apply pressure on
the strips as you go along. You may
need to cut and overlap the strips as
and when necessary to fit the shape
of the head but this is ok. End by attaching
the last strip to the polyurethane area
next to the lace front on the other
side. Ensure that there are no gaps
in the tape strip line.
This adhesive / tape will help firmly
hold the wig in place The main reason
for putting the adhesive or tape on
is to ensure that the wig does not look
unnatural. It also helps in styling
as well.
When your wig is attached firmly, you
can be rest assured that you will look
great and no one will know you have
a wig on. |
|
